576GB to 8,000GB (12TB) Capacities in 3U 19" Rackmount Chassis
Capable of RAID Levels 0, 1, 0+1, 3, 5, 10, 30, 50, and JBOD
Dual Active-Active RAID Controllers with Transparent Failover and Failback Operation
Expandable by Cascading up to 7 of DNF's FibreXpac 16000 Fibre Channel JBODs
Five 2 Gigabit/Second Dual Loop SFP Fibre Channel Ports per Controller
Two Ports for Hosts, Two Ports to Connect to Additional Enterprise F16-HA RAID Subsystems, One Port to Connect to Cascading FibreXpac 16000 JBODs
Includes Four LC Optical SFP Modules and 10-Meter LC-LC Cables for Host Connectivity
Supports up to Six Additional SFP Modules or SFP Patch Cables for External Expansion
Up to 1GB ECC-Protected Cache with Battery-Backup on Each RAID Controller (512MB Standard)
Out-of-Band Ethernet Interface for Remote Status Monitoring & Configuration
One Serial Port for Text Mode Management and One Serial Port for UPS Support
LCD Controller Panel Interface
System Fan Speed/Voltage/Temperature Self-Monitoring
Load-Sharing 460 Watt Hot-Swappable Dual Redundant Power Supplies
Up to 3 Years Parts & Labor Warranty (1 Year Standard)
Basic Features
2Gb/second hub embedded Fibre host channels: transfer rate up to 200MB/second for each channel
Dual-loop across all 16 drives within the Enterprise F16-HA enclosure
Auto-negotiate FC-AL, point-to-point, and switched fabric
Host side multi-path load balancing
Full-featured redundant controller architecture
Transparent RAID controller failover and failback operation
Multiple Logical Drive configurations, each with a different RAID level
Multiple arrays configurable with dedicated or global hot spares
Auto-detection and automatic background rebuild
Automatic bad sector reassignment
Configurable stripe size and write policy per array
LUN masking, LUN filtering: RAID-based and centralized access management in SAN
Online array expansion by adding new drives or copying and replacing drives of larger capacity
Up to 1024 LUNs for host mapping
Up to 64 TeraBytes per Logical Disk
Variable rebuild priority
Browser-based GUI manager on all major platforms
Auto-cache flush and auto-shutdown
Intelligent drive handling manages bad blocks during rebuild and media scan function for data maintenance
In degraded mode: skipping irreparable blocks to continue rebuild.
In normal operation: data block verification and repair.
Dedicated bandwidth to each connected drive
Module status LED indicators
Two per drive tray.
Two per cooling module.
One per power supply unit.
Eleven per RAID controller module.
Onboard alarm is triggered when one of the following modules fails
RAID controller module.
Cooling modules.
Power supply unit.
Hard drive.
Serial port communication with PC hyper-terminal.
Real-time event notification over Email, LAN broadcast, or SNMP traps
Host-side SES emulation with pass-through to back-end SES emulation
SNMP 2.0 MIBs with get and set commands
32KB NVRAM with Real Time Clock
Controller voltage and temperature self-diagnostics
Firmware rolling upgrade on redundant RAID controllers
Synchronized cache over dedicated Fibre channel
Concurrent I/O commands and tagged command queuing up to 256 commands
Optimization setting for random or sequential I/Os
SAN ready
* Pictures might vary from the actual units. Neither Dynamic Network Factory nor are its affiliates responsible for any misprints. For more information, contact your DNF Representative.
Enterprise,
Dynamic Network Factory, DNF, DNFstorage, StorageExpert and RAIDexpert are trademarks of Dynamic Network Factory, Inc.
WD Raptor is a trademark of Western Digital Corporation.
